Prerade, caferacer-i, fighteri sa stilom

[Gile_Extremeboy 7761 Napisano Octobar 9, 2011]

Motori sa emocijama koji posebni i jedinstveni, u koje je ulozeno puno truda,vremena i novca da bi se stvorili i šarmirali svet oko sebe. Pred njima niko ne ostaje ravnodusan, jer su sa stilom.

 

Zamolio bih da se u ovoj temi ne kace svakojake šklopocije kao u temi (streetfighter).

[Gile_Extremeboy 7761 Napisano Octobar 9, 2011]

Pogodite koji je motor ovo nekada bio ? Nepotrebne plastike su skinute kao kada se vrljava trava pokosi i dobije fantasticni engleski travnjak..

 

 

[StefiVA 617 Napisano Octobar 10, 2011]

Mislim da je kawasaki

[Bojan_Jgd 943 Napisano Octobar 10, 2011]

Meni se ovo ic ne svidja. A sta je? Pojma nemam...mozda hayabusa?

[Dušan M 13 Napisano Octobar 10, 2011]

Honda CBR 1000 RR 2004-05,mislim

[mohikanac 1209 Napisano Octobar 10, 2011]

Gile alal ti za ukus,nista ruznije u zivotu nisam video............

[Stevan B. 635 Napisano Octobar 10, 2011]

Honda CBR 1000 RR 2004-05,mislim

Nije CBR,Viljuska je USD na CBR-u plus vidi zadnju viljusku. I ja glasam za kawu. I to zx6r

[Gile_Extremeboy 7761 Napisano Octobar 10, 2011]

Jeste ZX6R 2001.

 

nekad

 

 

sad

 

[Gile_Extremeboy 7761 Napisano Octobar 10, 2011]

Isterivaceva prerada thundereca

 

[alex r6 193 Napisano Octobar 10, 2011]

meni se svidja,bas je rokerski

[ZZ 424 Napisano Octobar 10, 2011]

I meni se sviđa, cafe-raceri su mi najbliži posle čopera, obožavam customizaciju

[m900 226 Napisano Octobar 10, 2011]

Evo pa uživajte

 

http://sigalonautomotive.soup.io/tag/Custom%20Motorcycles?since=87672166

[Stevan B. 635 Napisano Octobar 10, 2011]

Na ovakve sam jako slab! Nekako mi imaju karaktera ovakvi motocikli!!!

[mohikanac 1209 Napisano Octobar 11, 2011]

Motori sa emocijama koji posebni i jedinstveni, u koje je ulozeno puno truda,vremena i novca da bi se stvorili i šarmirali svet oko sebe. Pred njima niko ne ostaje ravnodusan, jer su sa stilom.

 

Zamolio bih da se u ovoj temi ne kace svakojake šklopocije kao u temi (streetfighter).

 

U ovu kavu sto sto si ti okacio je ulozeno jako mnogo truda doj je poskidao sve sto se skinuti moze,truda je jakoooo mnogo ulozio dok je ofarbao motor,a novca jos vise,jako je skupo litar crne farbe,i ovaj far od fergusona napred hahahaah

[mohikanac 1209 Napisano Octobar 11, 2011]

Evo jedne prave prerade..........hayabusa sa gomilom prepravki,sto izgleda,sto mehanike..

 

http://image.superst...i_hayabusa+.jpg

[mohikanac 1209 Napisano Octobar 11, 2011]

[mohikanac 1209 Napisano Octobar 11, 2011 (promenjeno)]

Evo jos..

 

Promenio Octobar 11, 2011 član acim
Umetnuta slika.

[Gile_Extremeboy 7761 Napisano Octobar 11, 2011]

Motori sa emocijama koji posebni i jedinstveni, u koje je ulozeno puno truda,vremena i novca da bi se stvorili i šarmirali svet oko sebe. Pred njima niko ne ostaje ravnodusan, jer su sa stilom.

 

Zamolio bih da se u ovoj temi ne kace svakojake šklopocije kao u temi (streetfighter).

 

U ovu kavu sto sto si ti okacio je ulozeno jako mnogo truda doj je poskidao sve sto se skinuti moze,truda je jakoooo mnogo ulozio dok je ofarbao motor,a novca jos vise,jako je skupo litar crne farbe,i ovaj far od fergusona napred hahahaah

 

Znaci ja sam sad budala a ti si pametan. Dobro.

 

Ocu samo da kazem da ponekad i nije potrebno bogatstvo da bi se dobilo nesto lepo. Mada daleko od toga da je samo secena i skinute plastike.

 

Works on the Kawa ZX6R:

 

Fabricated / modified / relocated:

• Aluminum headlight brackets made from aluminum stock and factory clip-ons

• Ignition lock cylinder mount removed, upper triple shaved smooth

• Guage bracket

• Unused mount points on lower triple removed

• Forks lowered internally 1.5", externally 1"

• Extra mount lugs removed from fork tubes

• Aluminum bracket to relocate ignition lock cylinder

• Aluminum brackets for coolant reservior

• Coolant reservior made out of a camping stove fuel bottle - cap modified for overflow, inlet mounted in bottom

• Seat pan shaved and seat shaped from combining factory front and rear seat foam, then shaved to shape. Latching pin mounted in seat pan

• Custom leather seat cover

• Subframe cut, lowered, welded, crossbar for seat latch added

• Battery box custom made

• Rear brake reservior mount

• Front brake reservior mount

• Lower radiator mount bar

• Under-seat storage compartment

• Seat latch / lock cylinder

• Battery / relays / fusebox / CDI / fuel pump / fuel filter relocated

• Wiring harness - shortened, all connectors relocated

• Frame / subframe / swingarm - ram air tubes gound flat, mount lug for factory headlight removed, misc brackets & mount lugs removed on swingarm, holes drilled for mounting new brackets / clips / equipment - scratches, scrapes and dings filled

• Side stand shortened

• Clamps / guides for clutch cable

• Mount brackets for tail

• Fiberglass tail (not yet finished)

• Fuel lines re routed

• Radiator fins straightened

• Factory muffler mount flange removed from exhaust

 

 

Bolt-ons:

• Vortex race clip-ons

• Ducati Monster headlight

• Pazzo short/long race levers

• Handlegrips

• Braided steel brake lines

• Supertrapp exhaust

• Heaader wrap

• License plate mount

• LED license plate lights

• Oberon foot pegs

• Bar end mirrors

• Solid state flasher relay

• Rear lowering links

• Radiantz stop / turn / tail LED strip (not yet finished)

• Supertrapp muffler welded onto end of pipe

• Header wrap (the end isn't finished yet - ran out of wrap 6" short, clamp in the rear is temporary)

 

Parts replaced / new

• Rearset bolts

• Rear axle nut

• Several other rounded-off bolts around the bike

• All various factory bolts replaced with new allen bolts / cap screws, nuts replaced with nylocks the rest are media blasted & polished to be silver

• Upper steering head seal

• Fork seals

• Stator cover gasket

• Chain

• Lower radiator hose

• PCV hose

• Fuel lines

• Coolant expansion tank hose

• Throttle cables

• Brake reservior hoses

• Radiator bushings

• Tank bushings

• Clutch cable

• All zerk grease fittings

• Tires

• Chrome valves stems

• CDI

• Fuse / relay box

 

Painted / refinished

• Powder coated: Frame, swingarm, subframe.

• Black w/clear: Tank, wheels, fork tubes, brake rotors, headlight bucket, upper & lower triples, rearsets, heel guards, engine covers, misc brackets, lower radiator mount, coolant expansion tank.

• Wheels pinstriped

• Flat black: Engine, radiator, rear sprocket, storage tray, seat pan, timing cover, headlight ring, side stand, rear brake reservoir

 

Every single other part and sub-assembly on this bike, not listed here, down to individual screws, springs and clips, was disassembled, cleaned, repaired and/or rebuilt then polished or painted.

[ZZ 424 Napisano Octobar 11, 2011]

Ma opušteno Gile, u svakoj temi se nađe po jedan Danko

[ratboy 1389 Napisano Octobar 11, 2011]

Evo jedne prave prerade..........hayabusa sa gomilom prepravki,sto izgleda,sto mehanike..

 

http://image.superst...i_hayabusa+.jpg

 

Ružan.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

zezam se na račun tvog komentara od gore, custom bike ne može biti po ukusu svih samo mu ime kaže mada ima i onih koje niko nije pohvalio. Onaj s vrha teme je previše kusav, nedoradjen, fabrički rezervoar i sedište kao motorkom prepolovljeno, nešto nedostaje da bi dobio skladnu liniju.

[mohikanac 1209 Napisano Octobar 11, 2011]

Motori sa emocijama koji posebni i jedinstveni, u koje je ulozeno puno truda,vremena i novca da bi se stvorili i šarmirali svet oko sebe. Pred njima niko ne ostaje ravnodusan, jer su sa stilom.

 

Zamolio bih da se u ovoj temi ne kace svakojake šklopocije kao u temi (streetfighter).

 

U ovu kavu sto sto si ti okacio je ulozeno jako mnogo truda doj je poskidao sve sto se skinuti moze,truda je jakoooo mnogo ulozio dok je ofarbao motor,a novca jos vise,jako je skupo litar crne farbe,i ovaj far od fergusona napred hahahaah

 

Znaci ja sam sad budala a ti si pametan. Dobro.

 

Ocu samo da kazem da ponekad i nije potrebno bogatstvo da bi se dobilo nesto lepo. Mada daleko od toga da je samo secena i skinute plastike.

 

Works on the Kawa ZX6R:

 

Fabricated / modified / relocated:

• Aluminum headlight brackets made from aluminum stock and factory clip-ons

• Ignition lock cylinder mount removed, upper triple shaved smooth

• Guage bracket

• Unused mount points on lower triple removed

• Forks lowered internally 1.5", externally 1"

• Extra mount lugs removed from fork tubes

• Aluminum bracket to relocate ignition lock cylinder

• Aluminum brackets for coolant reservior

• Coolant reservior made out of a camping stove fuel bottle - cap modified for overflow, inlet mounted in bottom

• Seat pan shaved and seat shaped from combining factory front and rear seat foam, then shaved to shape. Latching pin mounted in seat pan

• Custom leather seat cover

• Subframe cut, lowered, welded, crossbar for seat latch added

• Battery box custom made

• Rear brake reservior mount

• Front brake reservior mount

• Lower radiator mount bar

• Under-seat storage compartment

• Seat latch / lock cylinder

• Battery / relays / fusebox / CDI / fuel pump / fuel filter relocated

• Wiring harness - shortened, all connectors relocated

• Frame / subframe / swingarm - ram air tubes gound flat, mount lug for factory headlight removed, misc brackets & mount lugs removed on swingarm, holes drilled for mounting new brackets / clips / equipment - scratches, scrapes and dings filled

• Side stand shortened

• Clamps / guides for clutch cable

• Mount brackets for tail

• Fiberglass tail (not yet finished)

• Fuel lines re routed

• Radiator fins straightened

• Factory muffler mount flange removed from exhaust

 

 

Bolt-ons:

• Vortex race clip-ons

• Ducati Monster headlight

• Pazzo short/long race levers

• Handlegrips

• Braided steel brake lines

• Supertrapp exhaust

• Heaader wrap

• License plate mount

• LED license plate lights

• Oberon foot pegs

• Bar end mirrors

• Solid state flasher relay

• Rear lowering links

• Radiantz stop / turn / tail LED strip (not yet finished)

• Supertrapp muffler welded onto end of pipe

• Header wrap (the end isn't finished yet - ran out of wrap 6" short, clamp in the rear is temporary)

 

Parts replaced / new

• Rearset bolts

• Rear axle nut

• Several other rounded-off bolts around the bike

• All various factory bolts replaced with new allen bolts / cap screws, nuts replaced with nylocks the rest are media blasted & polished to be silver

• Upper steering head seal

• Fork seals

• Stator cover gasket

• Chain

• Lower radiator hose

• PCV hose

• Fuel lines

• Coolant expansion tank hose

• Throttle cables

• Brake reservior hoses

• Radiator bushings

• Tank bushings

• Clutch cable

• All zerk grease fittings

• Tires

• Chrome valves stems

• CDI

• Fuse / relay box

 

Painted / refinished

• Powder coated: Frame, swingarm, subframe.

• Black w/clear: Tank, wheels, fork tubes, brake rotors, headlight bucket, upper & lower triples, rearsets, heel guards, engine covers, misc brackets, lower radiator mount, coolant expansion tank.

• Wheels pinstriped

• Flat black: Engine, radiator, rear sprocket, storage tray, seat pan, timing cover, headlight ring, side stand, rear brake reservoir

 

Every single other part and sub-assembly on this bike, not listed here, down to individual screws, springs and clips, was disassembled, cleaned, repaired and/or rebuilt then polished or painted.

 

 

Nista ozbiljno vec uglavnom nesto premesteno,ili neka nebitna sitnica,ja do sutra mogu da nabrajam sta sam sve radio na mom motoru...ali sve to uglavnom nije vredno spomena,i ako su ozbiljniji radovi od ovih na kavi...

 

Ima mnogo zanimljivijih motora da diskusiju,recimo ova hayabusa ima vise opreme nego sto vredi ova polutka od motora(ovaj kawasaki)..

[Disko Nindža 9935 Napisano Octobar 11, 2011]

moram se sloziti sa Mohikancem, ona Kawa ZX6 je stvarno uzas, izgleda polu-zavrseno

mada ni ona Hayabusa nije daleko otisla, nista posebno sto se tice izgleda, ali mehanika mi se vec svidja - Turbo

od slika dosad postavljenih najvise mi se svidja onaj stari grbavi GSXR

[sikiriki 148 Napisano Octobar 11, 2011]

meni su ove uljare stare naj za fajtera, pravi masl bajkovi

 

 

[Andreja 1330 Napisano Octobar 11, 2011]

Ja ću samo reći RADICAL DUCATI. :care:

Preprepresavršeno

 

http://www.google.rs/search?q=radical+ducati&hl=sr&biw=1024&bih=634&prmd=imvns&source=lnms&tbm=isch&ei=NoCUTrWcKY6Pswa8--CCBg&sa=X&oi=mode_link&ct=mode&cd=2&ved=0CBgQ_AUoAQ#q=radical+ducati&hl=sr&tbm=isch&prmd=imvns&source=lnt&tbs=isz:l&sa=X&ei=OYCUTsL8EMv2sgaJ5-3CBQ&ved=0CAoQpwUoAQ&bav=on.2,or.,cf.osb&fp=1c0bba0948da3b5e&biw=1024&bih=634

 

 

http://www.radicalducati.com/

[savke 643 Napisano Octobar 11, 2011]

http://www.polovniautomobili.com/oglas1529257/yamaha_fzr1000_exup_restyling/

Meni je ova prerada do OO!