Jump to content

Moto Zajednica

Prerade, caferacer-i, fighteri sa stilom

Recommended Posts

  • Drug član, 2470 postova
  • Lokacija: Braunau am Inn (Austrija) - Svilajnac Bobovo
  • Motocikl: CBF1000 SC58 '07, SV650N '06

Motori sa emocijama koji posebni i jedinstveni, u koje je ulozeno puno truda,vremena i novca da bi se stvorili i šarmirali svet oko sebe. Pred njima niko ne ostaje ravnodusan, jer su sa stilom.

 

Zamolio bih da se u ovoj temi ne kace svakojake šklopocije kao u temi (streetfighter).

Podeli ovaj odgovor sa prijateljima


Link to post
Share on other sites

  • Drug član, 2470 postova
  • Lokacija: Braunau am Inn (Austrija) - Svilajnac Bobovo
  • Motocikl: CBF1000 SC58 '07, SV650N '06

Pogodite koji je motor ovo nekada bio ? Nepotrebne plastike su skinute kao kada se vrljava trava pokosi i dobije fantasticni engleski travnjak..

 

21o31vq.jpg

 

mkeweo.jpg

  • Podržavam 1

Podeli ovaj odgovor sa prijateljima


Link to post
Share on other sites

  • Svrati ponekad, 159 postova
  • Lokacija: Banatsko Novo Selo
  • Motocikl: Varadero(Krmaca) 1000

Honda CBR 1000 RR 2004-05,mislim

Nije CBR,Viljuska je USD na CBR-u plus vidi zadnju viljusku. I ja glasam za kawu. I to zx6r

Podeli ovaj odgovor sa prijateljima


Link to post
Share on other sites

  • Drug član, 1318 postova
  • Lokacija: Lazarevac
  • Motocikl: Uljara 1127cm i tetejac 600cm

Motori sa emocijama koji posebni i jedinstveni, u koje je ulozeno puno truda,vremena i novca da bi se stvorili i šarmirali svet oko sebe. Pred njima niko ne ostaje ravnodusan, jer su sa stilom.

 

Zamolio bih da se u ovoj temi ne kace svakojake šklopocije kao u temi (streetfighter).

 

U ovu kavu sto sto si ti okacio je ulozeno jako mnogo truda doj je poskidao sve sto se skinuti moze,truda je jakoooo mnogo ulozio dok je ofarbao motor,a novca jos vise,jako je skupo litar crne farbe,i ovaj far od fergusona napred hahahaah

  • Podržavam 2

Podeli ovaj odgovor sa prijateljima


Link to post
Share on other sites

  • Drug član, 2470 postova
  • Lokacija: Braunau am Inn (Austrija) - Svilajnac Bobovo
  • Motocikl: CBF1000 SC58 '07, SV650N '06

Motori sa emocijama koji posebni i jedinstveni, u koje je ulozeno puno truda,vremena i novca da bi se stvorili i šarmirali svet oko sebe. Pred njima niko ne ostaje ravnodusan, jer su sa stilom.

 

Zamolio bih da se u ovoj temi ne kace svakojake šklopocije kao u temi (streetfighter).

 

U ovu kavu sto sto si ti okacio je ulozeno jako mnogo truda doj je poskidao sve sto se skinuti moze,truda je jakoooo mnogo ulozio dok je ofarbao motor,a novca jos vise,jako je skupo litar crne farbe,i ovaj far od fergusona napred hahahaah

 

Znaci ja sam sad budala a ti si pametan. Dobro.

 

Ocu samo da kazem da ponekad i nije potrebno bogatstvo da bi se dobilo nesto lepo. Mada daleko od toga da je samo secena i skinute plastike.

 

Works on the Kawa ZX6R:

 

Fabricated / modified / relocated:

• Aluminum headlight brackets made from aluminum stock and factory clip-ons

• Ignition lock cylinder mount removed, upper triple shaved smooth

• Guage bracket

• Unused mount points on lower triple removed

• Forks lowered internally 1.5", externally 1"

• Extra mount lugs removed from fork tubes

• Aluminum bracket to relocate ignition lock cylinder

• Aluminum brackets for coolant reservior

• Coolant reservior made out of a camping stove fuel bottle - cap modified for overflow, inlet mounted in bottom

• Seat pan shaved and seat shaped from combining factory front and rear seat foam, then shaved to shape. Latching pin mounted in seat pan

• Custom leather seat cover

• Subframe cut, lowered, welded, crossbar for seat latch added

• Battery box custom made

• Rear brake reservior mount

• Front brake reservior mount

• Lower radiator mount bar

• Under-seat storage compartment

• Seat latch / lock cylinder

• Battery / relays / fusebox / CDI / fuel pump / fuel filter relocated

• Wiring harness - shortened, all connectors relocated

• Frame / subframe / swingarm - ram air tubes gound flat, mount lug for factory headlight removed, misc brackets & mount lugs removed on swingarm, holes drilled for mounting new brackets / clips / equipment - scratches, scrapes and dings filled

• Side stand shortened

• Clamps / guides for clutch cable

• Mount brackets for tail

• Fiberglass tail (not yet finished)

• Fuel lines re routed

• Radiator fins straightened

• Factory muffler mount flange removed from exhaust

 

 

Bolt-ons:

• Vortex race clip-ons

• Ducati Monster headlight

• Pazzo short/long race levers

• Handlegrips

• Braided steel brake lines

• Supertrapp exhaust

• Heaader wrap

• License plate mount

• LED license plate lights

• Oberon foot pegs

• Bar end mirrors

• Solid state flasher relay

• Rear lowering links

• Radiantz stop / turn / tail LED strip (not yet finished)

• Supertrapp muffler welded onto end of pipe

• Header wrap (the end isn't finished yet - ran out of wrap 6" short, clamp in the rear is temporary)

 

Parts replaced / new

• Rearset bolts

• Rear axle nut

• Several other rounded-off bolts around the bike

• All various factory bolts replaced with new allen bolts / cap screws, nuts replaced with nylocks the rest are media blasted & polished to be silver

• Upper steering head seal

• Fork seals

• Stator cover gasket

• Chain

• Lower radiator hose

• PCV hose

• Fuel lines

• Coolant expansion tank hose

• Throttle cables

• Brake reservior hoses

• Radiator bushings

• Tank bushings

• Clutch cable

• All zerk grease fittings

• Tires

• Chrome valves stems

• CDI

• Fuse / relay box

 

Painted / refinished

• Powder coated: Frame, swingarm, subframe.

• Black w/clear: Tank, wheels, fork tubes, brake rotors, headlight bucket, upper & lower triples, rearsets, heel guards, engine covers, misc brackets, lower radiator mount, coolant expansion tank.

• Wheels pinstriped

• Flat black: Engine, radiator, rear sprocket, storage tray, seat pan, timing cover, headlight ring, side stand, rear brake reservoir

 

Every single other part and sub-assembly on this bike, not listed here, down to individual screws, springs and clips, was disassembled, cleaned, repaired and/or rebuilt then polished or painted.

  • Podržavam 2

Podeli ovaj odgovor sa prijateljima


Link to post
Share on other sites

  • Zainteresovan, 952 postova

Evo jedne prave prerade..........hayabusa sa gomilom prepravki,sto izgleda,sto mehanike..

 

http://image.superst...i_hayabusa+.jpg

1001_sbkp_01_z+2006_suzuki_hayabusa+.jpg

 

Ružan.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

:lol: zezam se na račun tvog komentara od gore, custom bike ne može biti po ukusu svih samo mu ime kaže mada ima i onih koje niko nije pohvalio. Onaj s vrha teme je previše kusav, nedoradjen, fabrički rezervoar i sedište kao motorkom prepolovljeno, nešto nedostaje da bi dobio skladnu liniju.

Podeli ovaj odgovor sa prijateljima


Link to post
Share on other sites

  • Drug član, 1318 postova
  • Lokacija: Lazarevac
  • Motocikl: Uljara 1127cm i tetejac 600cm

Motori sa emocijama koji posebni i jedinstveni, u koje je ulozeno puno truda,vremena i novca da bi se stvorili i šarmirali svet oko sebe. Pred njima niko ne ostaje ravnodusan, jer su sa stilom.

 

Zamolio bih da se u ovoj temi ne kace svakojake šklopocije kao u temi (streetfighter).

 

U ovu kavu sto sto si ti okacio je ulozeno jako mnogo truda doj je poskidao sve sto se skinuti moze,truda je jakoooo mnogo ulozio dok je ofarbao motor,a novca jos vise,jako je skupo litar crne farbe,i ovaj far od fergusona napred hahahaah

 

Znaci ja sam sad budala a ti si pametan. Dobro.

 

Ocu samo da kazem da ponekad i nije potrebno bogatstvo da bi se dobilo nesto lepo. Mada daleko od toga da je samo secena i skinute plastike.

 

Works on the Kawa ZX6R:

 

Fabricated / modified / relocated:

• Aluminum headlight brackets made from aluminum stock and factory clip-ons

• Ignition lock cylinder mount removed, upper triple shaved smooth

• Guage bracket

• Unused mount points on lower triple removed

• Forks lowered internally 1.5", externally 1"

• Extra mount lugs removed from fork tubes

• Aluminum bracket to relocate ignition lock cylinder

• Aluminum brackets for coolant reservior

• Coolant reservior made out of a camping stove fuel bottle - cap modified for overflow, inlet mounted in bottom

• Seat pan shaved and seat shaped from combining factory front and rear seat foam, then shaved to shape. Latching pin mounted in seat pan

• Custom leather seat cover

• Subframe cut, lowered, welded, crossbar for seat latch added

• Battery box custom made

• Rear brake reservior mount

• Front brake reservior mount

• Lower radiator mount bar

• Under-seat storage compartment

• Seat latch / lock cylinder

• Battery / relays / fusebox / CDI / fuel pump / fuel filter relocated

• Wiring harness - shortened, all connectors relocated

• Frame / subframe / swingarm - ram air tubes gound flat, mount lug for factory headlight removed, misc brackets & mount lugs removed on swingarm, holes drilled for mounting new brackets / clips / equipment - scratches, scrapes and dings filled

• Side stand shortened

• Clamps / guides for clutch cable

• Mount brackets for tail

• Fiberglass tail (not yet finished)

• Fuel lines re routed

• Radiator fins straightened

• Factory muffler mount flange removed from exhaust

 

 

Bolt-ons:

• Vortex race clip-ons

• Ducati Monster headlight

• Pazzo short/long race levers

• Handlegrips

• Braided steel brake lines

• Supertrapp exhaust

• Heaader wrap

• License plate mount

• LED license plate lights

• Oberon foot pegs

• Bar end mirrors

• Solid state flasher relay

• Rear lowering links

• Radiantz stop / turn / tail LED strip (not yet finished)

• Supertrapp muffler welded onto end of pipe

• Header wrap (the end isn't finished yet - ran out of wrap 6" short, clamp in the rear is temporary)

 

Parts replaced / new

• Rearset bolts

• Rear axle nut

• Several other rounded-off bolts around the bike

• All various factory bolts replaced with new allen bolts / cap screws, nuts replaced with nylocks the rest are media blasted & polished to be silver

• Upper steering head seal

• Fork seals

• Stator cover gasket

• Chain

• Lower radiator hose

• PCV hose

• Fuel lines

• Coolant expansion tank hose

• Throttle cables

• Brake reservior hoses

• Radiator bushings

• Tank bushings

• Clutch cable

• All zerk grease fittings

• Tires

• Chrome valves stems

• CDI

• Fuse / relay box

 

Painted / refinished

• Powder coated: Frame, swingarm, subframe.

• Black w/clear: Tank, wheels, fork tubes, brake rotors, headlight bucket, upper & lower triples, rearsets, heel guards, engine covers, misc brackets, lower radiator mount, coolant expansion tank.

• Wheels pinstriped

• Flat black: Engine, radiator, rear sprocket, storage tray, seat pan, timing cover, headlight ring, side stand, rear brake reservoir

 

Every single other part and sub-assembly on this bike, not listed here, down to individual screws, springs and clips, was disassembled, cleaned, repaired and/or rebuilt then polished or painted.

 

 

Nista ozbiljno vec uglavnom nesto premesteno,ili neka nebitna sitnica,ja do sutra mogu da nabrajam sta sam sve radio na mom motoru...ali sve to uglavnom nije vredno spomena,i ako su ozbiljniji radovi od ovih na kavi...

 

Ima mnogo zanimljivijih motora da diskusiju,recimo ova hayabusa ima vise opreme nego sto vredi ova polutka od motora(ovaj kawasaki)..

Podeli ovaj odgovor sa prijateljima


Link to post
Share on other sites

  • Hronični Motociklopata, 7328 postova
  • Lokacija: Severna Bačka
  • Motocikl: Freza 600ccm Blue Thunder

moram se sloziti sa Mohikancem, ona Kawa ZX6 je stvarno uzas, izgleda polu-zavrseno :staa:

mada ni ona Hayabusa nije daleko otisla, nista posebno sto se tice izgleda, ali mehanika mi se vec svidja - Turbo :takoje:

od slika dosad postavljenih najvise mi se svidja onaj stari grbavi GSXR 8)

Podeli ovaj odgovor sa prijateljima


Link to post
Share on other sites

  • ENDURO, 1344 postova
  • Lokacija: Vrčin
  • Motocikl: Honda XR600R

Pridruži nam se!

Možeš sada da napišeš svoj odgovor, a kasnije da se registruješ. Ako imaš nalog, uloguj se i napiši svoj odgovor.

Gost
Odgovori na ovu temu...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Aktivni korisnici   0 članova

    • Nema ulogovanih članova koji gledaju ovu stranu.


×
×
  • Create New...

Važno obaveštenje

Nastavkom korišćenja ovog sajta prihvatate Pravila korišćenja